Rhino Slider Evo Carbon 24″

Category: Tags: , ,
Daily Price£45.00
Weekly Price£204.75


The 24″ (60 cm) slider. This is the carbon fibre version, still strong but incredibly lightweight.
It can take a weight load of 15lbs (6kg).

The carbon 24″ is a wonderful weight when going into the countryside or urban landscape to capture motion or slider shots. Great for one man band when you are dealing with everything yourself. When combined with the included flywheel it makes every slider move you do a total breeze. No longer will you get camera judder or slow downs in your slider speed as you try to get that perfect shot. The flywheel helps to carry the carriage with your camera on top from one end to the other and makes your end mark easy to hit with a nice feathered stop.

Additionally, take off the flywheel and add the Rhino motion enabling live control, motion control or time-lapse.

We recommend 3 options for mounting this slider when using it with a tripod:

  • Placing your tripod centrally in the slider.
  • Tripod at one end with a lighting stand or c-stand at the other end.
  • For heavier loads we recommend the use of two tripods at each end of the slider which would then be weighted at the bottom with sandbags.

This slider does not come with a tripod. We recommend a 100mm bowl tripod that will support both your shooting rig and sliders weight.

A 100mm bowl riser for a tripod head can be supplied if you wish to use a separate head or one of your own.
(When hired with the Miller 55 tripod we will provide a shorter locking nut.)



  • Rhino 60cm Evo Pro slider (24″)
  • Rhino Flywheel
  • 1 x carriages with  3/8 stud
  • 100mm half bowl adapter to mount plate onto your tripod (75mm can be provided on request)
  • Soft case


There are three ways to set up your Rhino Slider, we call these Manual, Flywheel and Motion.


  • This is the complete manual setup when you don’t plan on using Flywheel or Motion. If you use Rhino Slider EVO without Flywheel or Motion, first remove the belt for a smoother slide.


  • To attach Flywheel, first remove the o-ring on the drive shaft (used for Rhino Motion). You can then place Flywheel on the driveshaft and tighten it down with Flywheel’s set-screw to lock Flywheel in place.


  • Use Motion for responsive and precise control of your slider (refer to Motion Quick Start Guide for detailed explanation).

Slider Setup:

  • You can either use the built-in all-terrain legs or mount it to one tripod (using the slider’s centre plate) or two tripods (by mounting the slider using the mounting threads on both endplates.

Mount your camera:

  • Mount a flat based 3/8-16″ ball or fluid head to the slider’s carriage and mount your camera on the head.

Prepare for shooting:

  • Unlock the carriage brake and you’re ready to start filming.
All prices exclude VAT at 20%