Paralinx Arrow Plus 1:2 Kit

Daily Price£38.00
Weekly Price£172.90


This kit comes with 1 transmitter and 2 receivers. Allowing for one camera signal to be sent to two monitors at once.

The Paralinx Arrow Plus system has new hardware with an advanced chipset enabling transmission to up to four Paralinx Arrow Plus receivers. More receivers can be requested when ordering.

The Paralinx Arrow sends an uncompressed 4:2:2 1920×1080 10-bit video signal.  Less than 1ms latency. Supports multiple framerates and resolutions. Operates on 5v power. Range of over 300ft (91m) line-of-sight. 256-bit encryption of transmitted signals. FCC, CE, and ROHS certified. HDMI video input/output. Transmitter weighs less than 40 grams.

Plug & Play–no set-up required.

Our kit comes with the Paralinx shield as well.
This is the perfect way to mount a Paralinx Arrow transmitter to your camera. Simply attach the custom-made machined-delrin Shield to an articulating arm or cheeseplate using the 1/4 20 or 3/8” screw holes or tie the Shield down to your camera body with a 3/8” bolt through the side rail.

Supported framerates: 23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i, 60p.


  • 1 x Arrow Plus transmitter
  • 2 x Arrow Plus receiver
  • 1 x Paralinx shield
  • 1 x HDMI coupler
  • 1 x Paralinx USB Regulator [PTap] for transmitter
  • 2 x Paralinx USB Regulator [PTap] for receiver
  • 1 x AC adaptor (US plug) for transmitter
  • 2 x AC adaptor (US plug) for receiver
  • 1 x mini-USB to USB cable for transmitter
  • 2 x Barrel-USB power cable for receiver
  • 1 x HDMI coupler (female-female) for use with transmitter
  • 1 x Remote control
  • 1 x IR cable for use with remote control


Arrow Plus Manual

Powering the Arrow:

  • The options are endless when it comes to powering the Paralinx Arrow transmitters and receivers. Please follow these guidelines though to be certain the units are powered properly without causing damage from third party components.

The Transmitter:

  • Requires 1 AMP
  • Accepts 5V Max

The Receiver:

  • Requires 2.1 AMPS
  • Accepts 5V MAX
  • * Can not be powered via the receiver’s USB port
  • When used with our Asus monitor, power can come straight from the USB ports on the side.

V-Mount Batteries

  • Arrow+ kit comes with a USB PTap regulator that can be connected to these types of batteries and provide a regulated USB port to supply power to receiver, transmitter, or other devices that would require similar power.
All prices exclude VAT at 20%